manualshive.com logo in svg

Argus 145 Plus, Manual

Share
Download
Argus 145 Plus Manual Download Page 171

11 IP Tests

ARGUS 145

 PLUS

171

















IP ping:

IP address

This is the address of the remote site. The ARGUS can save up to 

10 IP addresses. The saved IP addresses are available to all of the 

profiles.


The ARGUS shows the memory 
locations (a total of ten) available for 
storing IP addresses. Use the cursor 
keys to mark the memory location with 
the IP address that you wish to edit (in 
this example, the first memory location 
is marked (1/10).



View and edit the marked 
parameters if necessary

as name:

Continuation on 

next page

The address can be entered as an IP 
address (number) or as a name.

<Edit>

Open the marked IP 
address to edit it.

Summary of Contents for 145 Plus










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands