
14 Operation on an ISDN Access
ARGUS 145
PLUS
313
Level measurement other TE
In TE mode, the ARGUS will measure the level of a terminal connected in parallel. In this
case, the ARGUS is passive. Layer 1 must be activated on the terminal. The ARGUS
updates its measurement continuously.
The ARGUS - Main menu
Start measurement.
The ARGUS displays the level and an
evaluation of the useful signal:
<<
Level is too low
>>
Level is too high
OK
Level is in order
(0.75V
+20%
-33%
, i.e. from 0.9V to 0.5V)
none
no level
<R>on>
100
resistor switched in
<R>off>
100
resistor switched out
<New>
to set up Layer 1 again - to
ensure a reasonable
measurement.
Level measuring
other TE
Stop measuring level.
Open the Level measuring
menu.