manualshive.com logo in svg

Argus 145 Plus, Manual

Share
Download
Argus 145 Plus Manual Download Page 230

13 IPTV Tests

230

ARGUS 145

 PLUS

Start the IPTV Scan

Access mode in the example: ATU-R

Setup the xDSL or Ethernet connection.

The profile used to set up the xDSL 
connection (in this example, Profile 1) will 
also be used for IPTV scan.

Open the Main menu.








Depending on the protocol and access: 
The ARGUS will display the user name 
saved in the profile for the PPP 
connection. The user name can, however, 
be changed. 




If you change the user name, you must 
enter the password again

 


<Edit>

To edit the profile used for the 
connection (in this example 
Profile 1).

The access parameters are 
disabled. The test parameters 
can be configured, see page 53.

If the user name is changed 
here, it will only be placed in 
temporary storage; the profile 
itself is not modified.

The password entered here is not 
saved in the profile.

Single Tests

IPTV Scan

Enter password

Continuation on 

next page

Summary of Contents for 145 Plus










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands