manualshive.com logo in svg

Argus 145 Plus, Manual

The Argus 145 Plus is a feature-packed electronic device designed to streamline your everyday tasks. With its user-friendly interface and versatile functions, this manual-powered gadget empowers users to effortlessly manage their work and personal life. Unlock its full potential by downloading its manual for free from our website, manualshive.com.

Share
Download
background image

11 IP Tests

ARGUS 145

 PLUS

189

Start the HTTP download (in this example: ADSL access in access mode ATU-R)

Setup the xDSL or Ethernet connection.


The profile shown on the display will be 
used for the HTTP download (in this 
example, Profile 1).

Open the Main menu.



If no connection has been setup (by 
pressing 

<Start>

 in the State display), a 

connection will be setup automatically at 
this point using the default profile (see 
page 53).

Depending on the protocol and access: 
The ARGUS will display the user name 
saved in the profile for the PPP 
connection. The user name can, however, 
be changed. 



If you change the user name, you must 
enter the password again

 

<Edit>

To edit the preset profile (in this 
example, Profile 1).

The xDSL access parameters are 
disabled. The other parameters 
can be edited here.

If the user name is changed 
here, it will only be placed in 
temporary storage; the profile 
itself is not modified.

The password entered here is not 
saved in the profile.

Single Tests

HTTP download

Enter password

Continuation on 

next page

Summary of Contents for 145 Plus










































































































































































































































































































































































Reviews:

No comments

Related manuals for 145 Plus

Tacx Cosmos Assembling Instructions preview
Cosmos
Brand: Tacx Pages: 2
C.E. Nierhoff & Co C520 Troubleshooting Manual preview
C520
Brand: C.E. Nierhoff & Co Pages: 7
NEC NEAX 2000 IVS System Manual preview
NEAX 2000 IVS
Brand: NEC Pages: 54
Danfoss iSave 21 User Manual preview
iSave 21
Brand: Danfoss Pages: 106
Gatekeeper ITSS Installation Manual preview
ITSS
Brand: Gatekeeper Pages: 8
Gate Bure Rise & Go DB 56-309 Technical Manual preview
Bure Rise & Go DB 56-309
Brand: Gate Pages: 8
Keithley 7071 Instruction Manual preview
7071
Brand: Keithley Pages: 79
Kayakpro SUP ERGO Assembly Instruction Manual preview
SUP ERGO
Brand: Kayakpro Pages: 17
Yoshitake DS-1 Operation Manual preview
DS-1
Brand: Yoshitake Pages: 11
Land Pride RTA10 Series Operator'S Manual preview
RTA10 Series
Brand: Land Pride Pages: 36
Land Pride Skid Steer Rakes SR2672 Specifications & Capacities preview
Skid Steer Rakes SR2672
Brand: Land Pride Pages: 2
Land Pride RCM5020 Series Specifications & Capacities preview
RCM5020 Series
Brand: Land Pride Pages: 2
Land Pride Disc Harrows DH3510 Specifications & Capacities preview
Disc Harrows DH3510
Brand: Land Pride Pages: 2
Land Pride 55 Series User Manual preview
55 Series
Brand: Land Pride Pages: 4
Land Pride OS1548 Assembly Instructions preview
OS1548
Brand: Land Pride Pages: 4
Land Pride Straw Crimper CR2572 Parts Manual preview
Straw Crimper CR2572
Brand: Land Pride Pages: 16
Oakworks Medical PG Series Instruction & Maintenance Manual preview
PG Series
Brand: Oakworks Medical Pages: 28
Rainbow Super Funhouse Assembly Instructions Manual preview
Super Funhouse
Brand: Rainbow Pages: 35

Brands by name

Popular brands

Load more brands