Argus 145 Plus Manual Download Page 276

Page: 276 / 361

14 Operation on an ISDN Access

276

ARGUS 145

PLUS

14.8 Call Forwarding (CF)

14.8.1 CF Interrogation

The ARGUS will check whether a call diversion has been setup in the exchange for the

access under test. The ARGUS will show the type of diversion (CFU, CFNR or CFB) and

the call diversion’s service. The display is limited to a maximum of 10 call diversions for all

of the MSNs. The ARGUS will count any additionally set up call diversions. The ARGUS

can clear any call diversion setup in the exchange.

The ARGUS - Main menu






Start the CF interrogation;



the test can take several seconds.






Display:



Delete the call diversion



Security query



Type of call diversion (in the example,
CFU)

The type of call diversion will be displayed /



number of call diversions found



In this example: it displays the first of a
total of one call diversions (01/01)

The call diversion service

The number that should be diverted (from:)

The number to which calls should be
diverted (to:)

<Yes>

Clear the displayed call
diversion in the exchange If this
is not possible the ARGUS will
report: "Call diversion not
changeable!“

<All>

Delete all call diversions.

Do not delete the call
diversion!".



Open the Single tests menu.

D-Channel

Automatic

Clear the CF?

Summary of Contents for 145 Plus










































































































































































































































































































































































Search results

Summary of Contents for 145 Plus

Reviews:

Related manuals for 145 Plus

Brands by name

Popular brands

Argus 145 Plus, Manual

Search results

Summary of Contents for 145 Plus

Reviews:

Related manuals for 145 Plus

Brands by name

Popular brands