Argus 145 Plus Manual Download Page 43

Page: 43 / 361

6 Operation on an ADSL Access

ARGUS 145

PLUS

6.2 ADSL Settings

The ARGUS stores all of the settings required to run a test on an ADSL access in profiles.

Up to 10 user-defined profiles can be created. A specific profile can be selected before an

ADSL connection is setup or a test performed, otherwise the ARGUS will use the default

(preset) profile. Only those settings which are relevant will be used for the respective test

situation. The default settings can be restored at any time (see page 338). The procedure

for changing a setting will be illustrated with a single example:

ARGUS – status display

The ARGUS - Main menu

Select "Settings"

Mark “Profiles”

Continuation on

Summary of Contents for 145 Plus










































































































































































































































































































































































Search results

Summary of Contents for 145 Plus

Reviews:

Related manuals for 145 Plus

Brands by name

Popular brands

Argus 145 Plus, Manual

Search results

Summary of Contents for 145 Plus

Reviews:

Related manuals for 145 Plus

Brands by name

Popular brands