manualshive.com logo in svg

Argus 145 Plus, Manual

Share
Download
Argus 145 Plus Manual Download Page 135

8 Operation on an SHDSL Access

ARGUS 145

 PLUS

135

8.5 The ARGUS in the STU-R Router Access Mode

Connect the ARGUS to the PC with a patch cable and to the the SHDSL access with the 

xDSL cable (in the case of a 4-wire access using the SHDSL 4-wire cable or in the case of 

a 2, 4, 6 or 8-wire access with a patch cable).

In Router mode, the ARGUS replaces not only the modem but also the router. In this case, 

several PCs (connected via a hub/switch) can access the connection via a network 

connection.

The network IP addresses can either be assigned statically or the ARGUS can serve as a 

DHCP server and assign IP addresses to the connected PCs.

Settings for Ethernet / Protocol IP: see page 119









Setting

Bridge / Router

Ethernet

Autonegotiation on / off

IP

- IP mode

- own IP address

- IP netmask

- DHCP server: 



Start / End address 
domain, 

reservation period

Router

NAT on / off

Ethernet 

SHDSL 

Ethernet 

Hub/Switch

IP 

IP 

IP 

Ethernet 

e.g. PPPoE

  SHDSL 

access

The ARGUS does not have 
a firewall!

PC 

PC 

Summary of Contents for 145 Plus










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands