manualshive.com logo in svg

Argus 145 Plus, Manual

Share
Download
Argus 145 Plus Manual Download Page 182

11 IP Tests

182

ARGUS 145

 PLUS
















For information on protocol-dependent parameters, see  page 173

Traceroute:

IP address

This can be entered as an IP number or as a name (for 

instructions, see IP Ping / IP address).

Default setting: 

www.argus.info

Maximal hops

This sets the maximum number of hops that will be taken in the 

path to the destination node.

Range: 1 to 25

Default: 

25

Probes

This sets the number of attempts that will be made to get a 

response from a network node.

Range: 1 to 10

Default: 

3

 

Timeout

This sets the maximum amount of time that the ARGUS will wait for 

a response from a network node.

Range: 0.05 to 9.9 seconds

Default: 

3 seconds

Edit the marked 
parameters if necessary 

Summary of Contents for 145 Plus










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands