Argox ArgoxScan 9500 Manual Download Page 70

Page: 70 / 154

UPC-A

Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC-A

data.Default = Off for both 2 Digit and 5 Digit Addenda.

Addenda Required

When

Required

is scanned, the imager will only read UPC-A bar

codes that have addenda. You must then turn on a 2 or 5 digit

addenda.

Default = Not Required.

Addenda Separator

When this feature is on, there is a space between the data from the

bar code and the data from the addenda. When turned off, there is

no space. Default = On.

UPC-A/EAN-13 with Extended Coupon Code

Use the following codes to enable or disable UPC-A

and

EAN-13

with Extended Coupon Code. Default = On.

Summary of Contents for ArgoxScan 9500



























































































































































Search results

Summary of Contents for ArgoxScan 9500

Reviews:

Related manuals for ArgoxScan 9500

Brands by name

Popular brands

Argox ArgoxScan 9500, Manual

Search results

Summary of Contents for ArgoxScan 9500

Reviews:

Related manuals for ArgoxScan 9500

Brands by name

Popular brands