manualshive.com logo in svg

Argox ArgoxScan 9500, Manual

Share
Download
Argox ArgoxScan 9500 Manual Download Page 28

26

 

Scan 

 

Auto-sense Mode 

This programs the imager to work in Auto-sense mode. The LEDs 

are either off or at the lowest power for ambient conditions until a 

bar code is presented to the imager. Then the LEDs turn on 

automatically to read the code. Auto-sense Mode uses ambient 

light to detect the bar codes. If the light level in the room is not 

high enough, Auto-sense Mode may not work properly.

 

 

 

Snap and Ship 

Snap and Ship mode allows you to bypass the decoder and ship an 

image directly to the host. In this mode, an image is taken and 

shipped upon each trigger pull, instead of being sent to the decoder. 

Snap and Ship is useful when you are using your own decoder. 

Note: Snap and Ship mode only works if the imager is connected 

via an RS-232 serial port or via a USB keyboard. If you use Snap 

and Ship when the imager is connected to another interface, it calls 

the decoder after each image ship, but only to look for menu 

codes. 

 

Summary of Contents for ArgoxScan 9500



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands