manualshive.com logo in svg

Argox ArgoxScan 9500, Manual

Share
Download
Argox ArgoxScan 9500 Manual Download Page 38

36

 

Indication

   

 

Number of Beeps 

The number of beeps of a good read can be programmed from 1 - 

9. The same number of beeps will be applied to the beeper and 

LED in response to a good read. For example, if you program this 

option to have five beeps, there will be five beeps and five LED 

flashes in response to a good read. The beeps and LED flashes are 

in sync with one another. To change the number of beeps, scan the 

bar code below and then scan a digit (1-9) bar code and the 

Save 

bar code. 
     

Good Read Delay 

This sets the minimum amount of time before the imager can read 

another bar code. Default = No Delay. 

 

User-Specified Good Read Delay 

If you want to set your own length for the good read delay, scan 

the bar code below, then set the delay (from 0-30,000 milliseconds) 

by scanning digits from the inside back cover, then scanning 

Save

. 

 

Summary of Contents for ArgoxScan 9500



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands