Argox ArgoxScan 9500 Manual Download Page 50

Page: 50 / 154

Print Contrast

Print Contrast is used to adjust the way the imager reads Matrix

symbols. If an imager will be seeing consistently heavily printed

matrix symbols, then a Print Contrast of 6 may improve the

reading performance. For consistently light printing, a Print

Contrast of 2 may help. After scanning the

Set Print Contrast

bar

code, set the Print Contrast (from 1-7) by scanning digits from the

inside back cover, then scanning

Save

. Default = 4.

Print Contrast

Set Print Contrast

*Default

Video Reverse

Video Reverse is used to allow the imager to read bar codes that

are inverted. The “Off” bar code below is an example of this type

of bar code. If additional menuing is required, Video Reverse must

be disabled to read the menu bar codes and then re-enabled after

menuing is completed.

Note: Images downloaded from the unit will not be reversed. This

is a setting for decoding only.

Video Reverse

Summary of Contents for ArgoxScan 9500



























































































































































Search results

Summary of Contents for ArgoxScan 9500

Reviews:

Related manuals for ArgoxScan 9500

Brands by name

Popular brands

Argox ArgoxScan 9500, Manual

Search results

Summary of Contents for ArgoxScan 9500

Reviews:

Related manuals for ArgoxScan 9500

Brands by name

Popular brands