Argox ArgoxScan 9500, Manual

Page: 111 / 154

109
“xx.”, if characters are equal, increment cursor. If characters are
not equal, no format match. Syntax = FExx (xx stands for the hex
value for an ASCII code.
EC Check to make sure there is an ASCII number at the current
cursor position. If character is not numeric, format is aborted.
Syntax = EC .
ED Check to make sure there is a non-numeric ASCII character at
the current cursor position. If character is numeric, format is
aborted. Syntax = ED .
Data Formatter
When Data Formatter is turned off, the bar code data is output to
the host as read (including prefixes and suffixes). Choose one of
the following options. Default = Data Formatter On, but Not
Required.
*Data Formatter On, but Not
Required
Data Formatter Off
When Data Formatter is required, all input data must conform to
an edited format or the imager does not transmit the input data to
the host device.
Data Formatter On, Format Required