Areva MiCOM P441, Technical Manual

Page: 566 / 636

Courrier Data Base
MiCOM P441, P442 & P444
P44x/EN GC/E44
Page 42
Part B: Data Types
TYPE VALUE/BIT MASK DESCRIPTION
7 Platform event
8 Fault logged event
9 Maintenance Record logged event
G14 PAS UTILISE I> Function Link
Bit 0 I>1 VTS Block
Bit 1 I>1 VTS Block Non-Directionnal
Bit 2 I>2 VTS Block
Bit 3 I>2 VTS Block Non-Directionnal
Bit 4 I>3 VTS Block
Bit 5 I>4 VTS Block
Bit 6 Not Used
Bit 7 Not Used
G15 DISTURBANCE RECORD INDEX STATUS
0 No Record
1 Un-extracted
2 Extracted
G16 FAULTED PHASE
0x0001 Start A
0x0002 Start B
0x0004 Start C
0x0008 Start N
0x0010 Trip A
0x0020 Trip B
0x0040 Trip C
0x0080 Trip N
G17 ACTIVE/INACTIVE
0 Card not fitted
1 Card failed
2 Signal healthy
3 No Signal
G18 Record Selection Command Register
0x0000 No Operation
0x0001 Select next event
0x0002 Accept Event
0x0004 Select next Disturbance Record
0x0008 Accept disturbance record
0x0010 Select Next Disturbance record page
G19 LANGUAGE
0 English
1 Francais
2 Deutsch
3 Espanol
G20 (Second reg, First Reg) PASSWORD (2 REGISTERS)
0x0000, 0x00FF First password character
0x0000, 0xFF00 Second password character
0x00FF, 0x0000 Third password character
0xFF00, 0x0000 Fourth password character
NOTE THAT WHEN REGISTERS OF THIS TYPE ARE READ THE SLAVE WILL
ALWAYS INDICATE AN "*" IN EACH CHARACTER POSITION TO PRESERVE
THE PASSWORD SECURITY.
G21 IEC870 Interface
0 RS485
1 Fibre Optic
G22 PASSWORD CONTROL ACCESS LEVEL
0 Level 0 - Passwords required for levels 1 & 2.
1 Level 1 - Password required for level 2.
2 Level 2 - No passwords required.
G23 Voltage Curve selection
0 Disabled
1 DT
2 IDMT
G24 2 REGISTERS UNSIGNED LONG VALUE, 3 DECIMAL PLACES