Commissioning P44x/EN
CM/E33
MiCOM P441/P442 & P444
Page 51/54
8.3.2.5
Replacement of the relay board in the power supply module
Remove and replace the relay board in the power supply module as described in 8.3.2.4
above.
The relay board is the one with the board with holes cut in it to allow the transformer and two
large electrolytic capacitors to protrude through. To help identify that the correct board has
been removed, figure 29 illustrates the layout of the relay board.
P3012XXa
SERIAL No.
ZN0002
4
3
2
1
PL2
D
FIGURE 29 - TYPICAL RELAY BOARD
Ensure the setting of the link (located above IDC connector) on the replacement relay board
is the same as the one being replaced before replacing the module in the relay case.
Once the relay has been reassembled after repair, it should be recommissioned in
accordance with the instructions in sections 1 to 7 inclusive of this chapter.
8.3.2.6
Replacement of the extra relay board (P442 1 P444 only)
The P442 distance relay has two additional boards to the P441 and the P444 four additional
boards to the P441. Some of these boards provides extra output relays and optically-
isolated inputs.
To remove it, gently pull the faulty PCB forward and out of the case.
If the relay board is being replaced, ensure the setting of the link (located above IDC
connector) on the replacement relay board is the same as the one being replaced. To help
identify that the correct board has been removed, figure 29 and figure 30 illustrate the layout
of the relay and Opto boards respectively.
The replacement PCB should be carefully slotted into the appropriate slot, ensuring that it is
pushed fully back on to the rear terminal blocks.
Refit the front panel using the reverse procedure to that given in section 8.3.2. After refitting
and closing the access covers on case sizes 60TE, press at the location of the hinge-
assistance T-pieces so that they click back into the front panel moulding.
Summary of Contents for MiCOM P441
