90
GZ332
GZ333
7. Install the gear shift shaft into the crankcase making sure
the flat washer is in place on the right case end and the
spacer on the gear shift stop end.
DE677A
GZ335
8. Place the larger flat washer on the drive gear end of the
countershaft and the smaller flat washer on the high driven
gear end; then with shift forks and shift fork shaft, install
the countershaft assembly into the crankcase.
GZ280B
GZ336
9. Engage the shift forks into the gear shift shaft and
push the shift fork shaft into the crankcase.
GZ339
The right-side crankcase is now ready for installation to
the left-side crankcase.
Joining Crankcase Halves
1. Using rubber bands, support the connecting rods to
align with the cylinder bores.
AT THIS POINT
Proper transmission shifting should be verified by turn-
ing the gear shift shaft to select High, Low, Neutral, and
Reverse while rotating the input shaft and observing the
countershaft rotation.
