41
WC172B
WC174
27. Move the engine forward sufficiently to disengage the
spline shaft on the rear drive coupler and lift the engine
just free of the mounts; then clamp off the oil cooler hoses
and disconnect from the engine. Account for the spring.
WC767A
WC174A
Removing Engine/
Transmission (Wildcat 4/
4X)
Many service procedures can be performed without
removing the engine/transmission from the frame. Closely
observe the note introducing each sub-section for this
important information.
1. Remove the rear seats; then remove the battery cover
and disconnect the negative battery cable.
2. Remove the rear center console.
3. Remove the seat belt anchors; then remove the rear
splash panels.
4. Remove the three Allen-head cap screws from the
front output drive flange; then remove the starter
cable.
WC187A
WC187B
5. Remove all nuts and screws securing the rear body
panel; then loosen the gas tank fill hose clamp and
remove the cover forward through the ROPS tubes.
Seal the fill hose to prevent contamination of gas or
vapor escaping.
