14
DE093A
DE095
4. Remove the movable drive face using care to keep
the face plate tight against the drive face to prevent
the weights from falling out. Account for a spring
seat, spring, bushing, and lock washer.
DE096A
DE094A
5. Thread one of the V-belt cover screws into the fixed
driven face and turn clockwise to open the driven
pulley faces.
6. Push the V-belt down between the sheaves of the
driven pulley approximately one inch; then making
sure not to dislocate the one-way clutch from the
fixed drive hub, squeeze the belt together and
remove from the drive clutch.
DE098A
INSTALLING
1. Place the V-belt into position over the driven pulley
noting the directional arrows on the V-belt.
DE488
NOTE: The diesel engine in this ATV rotates coun-
terclockwise as viewed from the right side; therefore,
if directional arrows are printed on the V-belt, they
must be directed rearward.
2. Push the V-belt down into the driven pulley approxi-
mately one inch; then squeeze the belt together and
slide over the fixed drive hub and onto the one-way
clutch.
DE098A
