9
DE519D
11. Install the oil level stick and push in firmly.
12. Remove the oil level stick; the engine oil level
should be above the illustrated “L” mark but not
higher than the illustrated “F” mark.
DE024A
13. Inspect the area around the drain plug and oil filter
for leaks.
14. Install the right-side engine cover.
Transmission Lubricant
Check and change the transmission lubricant according
to the Maintenance Schedule. When adding or changing
the lubricant, use approved SAE 80W-90 hypoid and use
the following procedure.
1. Place the ATV on level ground.
2. Remove the transmission fill plug. Make sure not to
allow contaminants to enter the opening.
DE026A
3. Remove the transmission drain plug from the bottom of
the transmission and drain the lubricant into a drain pan.
DE016A
4. Install the drain plug and tighten securely. Pour rec-
ommended lubricant into the filler hole. Install the
filler plug.
5. Remove the transmission lubricant level stick and
wipe it with a clean cloth; then check the lubricant
level with the level stick.
DE002A
Front Differential/Rear
Drive Lubricant
Check and change the lubricant according to the Periodic
Maintenance Chart. When adding or changing the lubri-
cant, use approved SAE 80W-90 hypoid gear lube.
CAUTION
Do not over-fill the engine with oil. Always make sure
that the oil level is above the “L” mark but not higher
than the “F” mark.
