72
DE102A
TRANSMISSION
Disassembling Gear Case
1. Remove the gear position switch. Account for two
contact pins and two springs.
CD997
2. Remove the cap screws securing the secondary out-
put shaft bearing housing; then tap the housing with
a rubber mallet and remove. Account for two align-
ment pins.
DE117A
3. Mark the shift shaft to align with a reference on the
shift arm; them remove the shift arm.
DE119A
4. Remove the shift shaft housing. Account for a gas-
ket.
5. Remove the shift shaft, noting the match marks on
the drive and driven gear plates. Account for a
washer on each end.
DE122A
6. Remove the nut securing the shift cam detent stop-
per/spring assembly; then remove the assembly and
account for a spring and washer.
DE123
7. Remove the speed sensor housing; then remove the
snap ring securing the rotor and remove the rotor.
Account for two alignment pins, a gasket, and two
snap rings.
