78
7. Inspect shift forks for excessive wear, galling of
wear surfaces, or discoloration.
DE165
8. Inspect shift cam assembly for worn cam grooves or
broken springs.
DE677C
9. Inspect transmission case halves for loose bearings,
discolored bearing pockets, filings, or damaged
threads.
DE171
10. Inspect shift cam detent stopper and shift cam detent
for worn rollers or broken spring.
DE128
11. Inspect bearings for discoloration, flaking, or rough-
ness and binding when turning.
12. Inspect and thoroughly clean all bearing pockets,
thread bores, and plug openings to remove any metal
filings or dirt accumulations.
DE171A
13. Clean all parts to be used for assembling in parts-
cleaning solvent; then dry with compressed air.
Assembling Countershaft
1. Place the thrust washer on the splined end of the
countershaft; then install the low driven gear bushing
and bearing.
DE155A
! WARNING
Always wear eye protection when using compressed air.
