79
DE158B
2. Install the low driven gear onto the bearing with the
shift dog slots directed toward the fine-splined sec-
tion of the countershaft; then secure with a splined
washer and lock washer.
DE184
3. Place a splined thrust washer onto the countershaft;
then install the reverse driven gear bushing and bear-
ing.
DE185A
4. Install the reverse driven gear onto the bearing; then
secure with a splined washer and snap ring.
NOTE: Always install snap rings with the flat (sharp)
side away from the washer.
DE186
5. Install the reverse shift dog and splined bushing onto
the shaft; then secure with a snap ring.
DE187A
6. Install the countershaft drive gear and thrust washer.
7. Install the high/low shift dog with the raised lugs
directed toward the low driven gear.
DE189A
DE190A
