56
CF229A
2. Lock the seat into position by pull-
ing the two latch handles to the
rear and rotating them to the hori-
zontal position.
CF226A
3. To remove the rear seat, pull the
two latch handles to the rear and
rotate them to the vertical position.
4. Lift the rear of the seat up; then
pull slightly to the rear and lift the
seat off the mountings.
CF227A
FRONT SEAT LOCK
NOTE: The rear seat (if installed)
must be removed prior to remov-
ing the front seat.
1. To remove the front seat, pull the
seat lock lever up (located at the
rear of the seat). Raise the rear end
of the seat and slide it rearward.
2. To lock the seat into position, slide
the front of the seat into the seat
retainers and push down firmly on
rear of seat. The seat should auto-
matically lock into position.
TRAILERING AND
TOWING
The TRV is equipped with a frame-
mounted receiver for a standard 2 in.
receiver hitch. The standard receiver
hitch must be purchased separately.
738-424A
! WARNING
Make sure the seat is secure before
mounting the ATV. Severe personal
injury may result if the seat is not
properly secured.
! WARNING
Make sure the seat is secure before
mounting the ATV. Severe personal
injury may result if the seat is not
properly secured.
! WARNING
Never use the front rack or rear
backrest support as towing or
trailering points.
Summary of Contents for 2010 700 Diesel SD
