manualshive.com logo in svg

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 88 / 96

Share
Download
Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 88

86

U.S. EPA DIESEL EMISSION CONTROL 

STATEMENT/WARRANTY COVERAGE

(U.S. Only)

STATEMENT/WARRANTY

Arctic Cat warrants to the original retail purchaser, and each subsequent purchaser, that
all U.S. EPA-certified Arctic Cat diesel-powered ATV’s are designed, built, and equipped to
conform to all U.S. EPA Emission Control Regulations. Please read the following
information completely.

Your authorized Arctic Cat ATV dealer will repair or replace any defective emission-related
component at no cost to you during the warranty period. You may have non-warranty
service performed by any repair establishment that uses equivalent components. The
regulations provide significant civil penalties for tampering that causes your ATV to no
longer meet U.S. EPA emission standards.

Arctic Cat further warrants that the engine and its emission-related components are free
from defects in materials or workmanship that could cause the engine to fail to comply
with applicable regulations during the warranty period.

If you have any questions about this information, or the emission warranty coverage
statement, contact your local authorized Arctic Cat ATV dealer.

WARRANTY PERIOD

The emission warranty period for this ATV begins on the same date as the standard
warranty coverage and continues for two (2) years.

COMPONENTS COVERED

The emissions warranty covers major emissions control components and emission-
related components listed as follows:

Engine Components

Fuel/Air System

Pre-Combustion Chamber

Fuel Injectors

Engine Valves/Valve Seals

Fuel Control Rack

Engine Coolant Temperature Sensor

Governor

Intake/Exhaust Manifold

Fuel Limiting Device
Crankcase Vapor Recirculation
System

Miscellaneous Items Used in Aforementioned Systems

Connectors
Switches
Grommets
Clamps
Hoses
Ties
Gaskets
Wiring

OWNER’S RESPONSIBILITIES

The owner of any ATV warranted under this Arctic Cat Emission Control Statement is
responsible for the proper maintenance and use of the ATV as stated in the Operator’s
Manual. Proper maintenance generally includes replacement and service, at the owner’s
choosing, such items as air filter, oil and oil filter, or any other part, item, or device related
to emissions control as specified in the Operator’s Manual. It is the owner's responsibility
to ensure that the ATV is used in a manner for which it was designed.

Summary of Contents for 2010 700 Diesel SD

































































































Reviews:

No comments