Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 57

Page: 57 / 96

GENERA

L INFOR

ION

3. Remove the level stick; the trans-

mission lubricant level should be

above the “L” mark but not higher

than the “F” mark.

DE023A

SAFETY FLAG

BRACKET

A bracket is provided for mounting a

flag at the rear of the ATV.

REAR RACK

1. To remove the rear rack, remove

the front locking pins (A); then

pull the two rear latch handles (B)

to the rear and rotate to the vertical

position. Remove the rack.

DE039A

DE037A

2. To install the rear rack, place the

rack into the two front receivers;

then lower the rear of the rack into

the rack latch receivers. Install the

two front locking pins; then

release the rack latches and lock

into position.

RACK LOADING (Front

and Rear)

The front rack and rear rack are

designed to carry specified load capaci-

ties. Always refer to the Load Capacity

Ratings Chart for proper capacities.

REAR SEAT (Optional)

1. To install the optional rear seat,

remove the rear rack; then engage

the two front mounting lugs into

the mounting rack. While holding

down firmly on the front of the

seat, push the seat forward until

the rear tabs engage the rear

mounting latches.

CAUTION

Do not overfill the transmission
with lubricant. Always make sure
the lubricant level is above the “L”
mark but not higher than the “F”
mark.

! WARNING

Make sure the loads on the front
and rear racks will not interfere
with the ATV controls or obstruct
the view of the operator. Also, make
sure the loads are evenly distrib-
uted, properly secured, and will not
shift while operating the ATV.

Summary of Contents for 2010 700 Diesel SD

































































































Search results

Summary of Contents for 2010 700 Diesel SD

Reviews:

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 57 / 96

Search results

Summary of Contents for 2010 700 Diesel SD

Reviews: