Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 31

Page: 31 / 96

SOU

ND JU

DGMENT

! WARNING

Indicates a potential hazard that could
result in a serious injury or death.

Sound Judgment

Cargo Limitations

Limit the ATV to the load capacity rat-

ings identified in the Load Capacity

Ratings chart. So if you and your pas-

senger combined weigh in at over 500

lb (226 kg), leave some of that extra

cargo at home. The combined weight

limit, including you, your passenger,

your rack cargo, and your trailer, is a

specified amount, so consult the chart

and monitor it carefully.

Extra weight on the ATV will also

throw you off balance if it’s not distrib-

uted evenly, side-to-side and front-to-

rear.

Cargo has such a huge affect on han-

dling that you need to pay a lot of atten-

tion to your speed. Even on really level

areas, you should keep it under 10 mph

(16 kph) if you’ve got a trailer attached.

Avoid uneven terrain. Also, consider

that your braking distance is going to
increase with the more weight you carry.

Load Capacity Ratings

Chart

Max Load Capacity

- Total weight of

operator and passenger, accessory

weight, tongue weight, and cargo on the

front and rear rack.

Tongue Weight

- Weight on trailer

tongue.

Towing Capacity

- Total weight of

trailer and all cargo in the trailer.

Speedrack

When installing Speedrack accesso-

ries, make sure to read and carefully

follow the instructions provided in

each kit including all weight restric-

tions as noted on placards and decals.



NOTE:

Use extra caution when

operating this ATV with additional
loads such as passenger, accesso-
ries, and/or cargo. Handling of the
ATV may be adversely affected.
Reduce speed when adding addi-
tional loads.

Think about these when dealing
with cargo:

1. Rack weight limit
2. Trailer weight limit
3. Weight distribution
4. Speed

ARCTIC CAT LOAD CAPACITY

RATINGS

Item

Specification

(lb)

(kg)

Max Load Capacity

635

288

Operator Weight (max)

200

Passenger Weight (with
optional passenger seat
installed) (max)

200

Front Rack (max)

100

Rear Rack (max)

200

Rear Box - Optional (max)

200

Rear Rack and Tongue
Weight

Towing Capacity (max)

1050

477

Summary of Contents for 2010 700 Diesel SD

































































































Search results

Summary of Contents for 2010 700 Diesel SD

Reviews:

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 31 / 96

Search results

Summary of Contents for 2010 700 Diesel SD

Reviews: