Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 24

Page: 24 / 96

! WARNING

Indicates a potential hazard that could
result in a serious injury or death.

Prevention

The second step in Prevention is checking the condition of your ATV. Chances

are good that you’ll be using your ATV in some rough terrain, and there’s no way

you want your brakes to go out when riding downhill. You need to check the fol-

lowing parts on your ATV before every ride.

1. Tires and Wheels

2. Controls and Cables

3. Lights and Electric

4. Oil and Fuel

5. Chassis

6. Miscellaneous Items

One easy way to remember what parts you need to check is by using the acronym
“T-CLOC.” It stands for:

1. TIRES AND WHEELS

Correct tire pressure is crucial. Consult

the General Maintenance section of

this Operator’s Manual for tire pressure

guidelines. Incorrect tire pressure can

cause poor handling, instability, and a

loss of ATV control.

While checking the tire pressure,

inspect the tread and sidewalls of the

tires for cracks, cuts, or other damage

that could indicate they need to be

replaced.

2. CONTROLS AND

CABLES

With the engine running and brake

applied, check all transmission posi-

tions: forward, neutral, and reverse.

A. Brakes

Squeeze your hand brake lever. If it

feels soft or “squishy,” it could be low

on fluid or have a leak — refer to the

General Maintenance section of this

Operator’s Manual for instructions.

Don’t use the ATV until the brakes are

operating normally.

Test the brake lever lock and see if it

locks the hand brake lever into posi-

tion; then disengage it to release the

brake. Be sure that the auxiliary brake

near the footrest is working; your

brakes could fail during a ride if

they’re not maintained.

Condition of the ATV

IRES AND

WHEELS

ONTROLS

AND CABLES

IGHTS AND

ELECTRIC

IL AND FUEL

HASSIS

Check:

1. Tire pressure
2. Tire surface (tread and sidewalls)

Check:

1. Forward
2. Neutral
3. Reverse

Check:

1. Hand brake lever
2. Auxiliary brake pedal
3. Brake lever lock

Summary of Contents for 2010 700 Diesel SD

































































































Search results

Summary of Contents for 2010 700 Diesel SD

Reviews:

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 24 / 96

Search results

Summary of Contents for 2010 700 Diesel SD

Reviews: