manualshive.com logo in svg

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 77 / 96

Share
Download
Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 77

75

GENER

A

L MAINTENAN

CE

WHEEL REMOVAL

1. Park the ATV on level ground and

engage the brake lever lock.

2. Loosen the lug nuts on the wheel

to be removed.

3. Elevate the ATV.

4. Remove the lug nuts.

5. Remove the wheel.

6. Install the wheel and install the lug

nuts.

7. Tighten the nuts in a crisscross

pattern to 40 ft-lb.

8. Remove the jack.

MUFFLER/SPARK 

ARRESTER

The muffler has a spark arrester which

must be periodically cleaned. At the

intervals shown in the Maintenance

Schedule, clean the spark arrester using

the following procedure.

1. Remove the three cap screws

securing the spark arrester assem-

bly to the muffler.

CF105A

2. Using a suitable brush, clean the

carbon deposits from the screen

taking care not to damage the

screen.

CF104

NOTE: If the screen or gasket is

damaged in any way, it must be
replaced.

3.  Install the spark arrester assembly

and secure with the three cap

screws. Tighten cap screws to 48

in.-lb.

LIGHT BULB 

REPLACEMENT

The wattage rating of each bulb is

shown in the chart. When replacing a

burned bulb, always use the same watt-

age rating.

Headlight

NOTE: The bulb portion of the

headlight is fragile. HANDLE WITH
CARE. When replacing the head-
light bulb, do not touch the glass
portion of the bulb. If the glass is
touched, it must be cleaned with a
dry cloth before installing. Skin oil
residue on the bulb will shorten
the life of the bulb.

To replace the headlight bulb, use the

following procedure.

! WARNING

Wait until the muffler cools to avoid
burns.

Headlight

12V/27W (4)

Taillight/Brakelight

12V/8W/27W

CAUTION

Use only specified bulbs indicated
in the chart as replacement bulbs.

Summary of Contents for 2010 700 Diesel SD

































































































Reviews:

No comments