manualshive.com logo in svg

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 74 / 96

Share
Download
Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 74

72

1. Loosen the jam nut from the throt-

tle cable adjuster.

2. Slide the rubber boot away and

turn the adjuster until the throttle

lever has proper free-play of 3-6

mm (1/8 - 1/4 in.).

ATV-0047

3. Tighten the knurled nut against the

throttle cable adjuster securely;

then slide the rubber boot over the

adjuster.

AIR FILTER

The air filter inside the air filter hous-

ing must be kept clean to provide good

engine power and fuel mileage. If the

ATV is used under normal conditions,

service the filter at the intervals speci-

fied. If operated in dusty, wet, or

muddy conditions, inspect and service

the filter more frequently. Use the fol-

lowing procedure to remove the filter

and inspect and/or clean it.

NOTE: This ATV is equipped with

a dry-paper air filter and a cotton-
fabric safety element.

DE014A

1. Open the air filter access cover and

remove the operator’s seat; then

rotate the air filter housing cover

counterclockwise and remove

from the filter housing.

DE006A

2. Remove the dry-paper air filter.

Do not remove the cotton-fabric

safety element at this time.

DE007

3. Clean dust and debris from the air

filter housing; then remove the

cotton-fabric safety element using

care not to allow dirt and debris to

enter the engine.

CAUTION

Failure to inspect the air filter fre-
quently if the ATV is used in dusty,
wet, or muddy conditions can dam-
age the engine.

Summary of Contents for 2010 700 Diesel SD

































































































Reviews:

No comments