Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 25

Page: 25 / 96

PRE

VENTION

! WARNING

Indicates a potential hazard that could
result in a serious injury or death.

Prevention

B. Throttle

The throttle should have a free, smooth

range of motion. If it seems to “stick”

at any point, refer to the General Main-

tenance section of this Operator’s Man-

ual for instructions. Driving your ATV

with a sticking throttle can turn your

leisurely ride into an unwelcome acci-

dent. Don’t drive your ATV if the throt-

tle sticks.

3. LIGHTS AND

ELECTRIC

Turn the hi-beam and lo-beam on and

off to make sure they work. At the

same time, check that the taillight and

brakelight work. Also, check the status/

warning indicators (reverse, neutral,

and hi-lo beam) on the LCD when you

start the ATV. Don’t drive the ATV

unless all systems are working.

Check the ignition switch and engine

stop switch.

4. OIL AND FUEL

Start with a full tank of fuel before

every ride, and while you’re at it, top

off the oil. Don’t forget to check for

fluid leaks around the ATV. Watch the

overheat lamp to ensure the engine

coolant level is adequate.

5. CHASSIS

Grass and leaves can gum-up your sus-

pension and shocks. Clear and clean

the suspension arms, shock springs,

and fenders. Check smoothness by

turning the handlebar full-left and full-

right. Check that there is no binding,

restrictions, free-play, or looseness in

steering components.

6. MISCELLANEOUS

ITEMS

Inspect your air filter. Look for debris

or damage that may indicate you need

to replace it. A clogged filter can stop

an engine. Check your battery termi-

nals for corrosion. Also, be sure to

tighten any loose parts, nuts, or bolts.

Check:

1. Free, smooth range of motion

Check:

1. Hi-beam
2. Lo-beam
3. Taillight/brakelight
4. Status/warning indicators

Check:

1. Ignition switch
2. Stop switch

Check:

1. Fuel
2. Oil
3. Fluid leaks

Check:

1. Suspension arms
2. Shock springs
3. Fenders
4. Steering

Check:

1. Air filter
2. Battery
3. Tighten parts, nuts, and bolts

Summary of Contents for 2010 700 Diesel SD

































































































Search results

Summary of Contents for 2010 700 Diesel SD

Reviews:

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 25 / 96

Search results

Summary of Contents for 2010 700 Diesel SD

Reviews: