manualshive.com logo in svg

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 50 / 96

Share
Download
Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 50

48

GENERAL INFORMATION

TRV IDENTIFICATION 

NUMBERS

This ATV has two identification num-

bers: Vehicle Identification Number

(VIN) and Engine Serial Number

(ESN).

The VIN is located on the frame sup-

port rail.

AF968C

The ESN is located on the back-side of

the engine crankcase.

DE001A

These numbers are required by the

dealer to complete warranty claims

properly. No warranty will be allowed

by Arctic Cat if the VIN or ESN is

removed or mutilated in any way.

Always provide the ATV name, VIN,

and ESN when contacting an autho-

rized Arctic Cat ATV dealer for parts,

service, accessories, or warranty. If a

complete engine must be replaced, ask

the dealer to notify Arctic Cat for cor-

rect registration information.

IGNITION SWITCH/KEY

ATV-055

Two keys come with the ATV. Keep the

spare key in a safe place. An identify-

ing number is stamped on each key.

Use this number when ordering a

replacement key.

CONTROL LOCATIONS 

AND FUNCTIONS
Ignition Switch

The ignition switch has three positions.

ATV-0056

OFF

 position — All electrical circuits

except the accessory plug are off. The

engine will not start. The key can be

removed in this position.

NOTE: The accessory plug is

powered by the battery at all times.

ON

 position — The ignition circuit is

complete and the engine can run. The

key cannot be removed in this position.

The V-belt cooling fan runs continu-

ously.

Summary of Contents for 2010 700 Diesel SD

































































































Reviews:

No comments