manualshive.com logo in svg

Arctic Cat 2010 700 Diesel SD, Operator'S Manual, Page: 65 / 96

Share
Download
Arctic Cat 2010 700 Diesel SD Operator'S Manual Download Page 65

63

GENER

A

L MAINTENAN

CE

SHOCK ABSORBERS

Each shock absorber should be visibly

checked weekly for excessive fluid

leakage (some seal leakage may be

observed but it does not indicate the

shock is in need of replacement), cracks

or breaks in the lower case, or a bent

shock rod. If any one of these conditions

is detected, replacement is necessary.

NOTE: When the ATV is operated

in extremely cold weather (-23° C/
-10° F or colder), a small amount of
leakage may be present. Unless
the leakage is excessive, replace-
ment is not necessary.

The shock absorber has a spring force

adjustment sleeve with five adjustment

positions to allow the spring to be

adjusted for different riding and load-

ing conditions. If the spring action is

too soft or too stiff, adjust it according

to the chart.

CD453

NOTE: Before attempting to

adjust suspension, clean dirt and
debris from  the sleeve and remove
load from the suspension; then
use the spanner wrench to adjust
the sleeve to the desired position.

NOTE: It is recommended that all

ATV weight be taken off the sus-
pension prior to adjusting shock
absorber sleeves.

GENERAL 

LUBRICATION
Cables

None of the cables require lubrication;

however, it is advisable to lubricate the

ends of the cables periodically with a

good cable lubricant.

Engine Oil and Filter

Change the engine oil and oil filter at

the scheduled intervals. The engine

should always be warm when the oil is

changed so the oil will drain easily and

completely.

1. Park the ATV on level ground.

2. Remove the oil filler cap. Be care-

ful not to allow contaminates to

enter the opening.

DE025A

3. Remove the engine drain plug

from the bottom of the engine and

drain the oil into a drain pan.

DE017A

Position

Spring

Force

Setting

Load

1

Stronger

Soft

Stiff

Light

Heavy

2

3

4

5

Summary of Contents for 2010 700 Diesel SD

































































































Reviews:

No comments