ZyWAN User Manual
Configuring the ZyWAN
© 2008 Arcom Issue D
81
Terminal Clients
The
Terminal Clients
tab looks like this:
The various items must be configured in order to set up Terminal Client services. The
Terminal Client makes an outbound TCP/IP connection to a remote server, allowing
pass-through communication with a local serial port. Its serial port also provides AT
command emulation, to act similar to a dial modem.
After setting all the
Terminal Client
properties, click the
Submit New Configuration
button before switching to a new tab or closing the window.
Changes made to the
Terminal Client
page take effect immediately after
submitting changes, without requiring a reboot.
To allow one or more Terminal Client services to be configured, set
Enable Terminal
Clients
to
Yes
. The
Table of Terminal Clients
is displayed:
The following buttons are available:
Button
Explanation
Insert Row#
Each of the Terminal Clients exists as a large set of properties in a
numbered table row. In order to insert a row in the table, enter a
number in the box between 1 and one greater than the highest
number of rows. Then click the
Insert Row#
button to insert a blank
row. This row must be filled in with all data required.
Note that this table can get very large, with inner tables on each
Terminal Client table row. When adding or deleting a Terminal Client
configuration, make sure to click the
Insert Row#
or
Delete Row#
buttons at the very bottom of the main table.
Delete Row#
In order to delete a Terminal Client configuration (a row in the main
table), enter a number in the box between 1 and the highest number
of rows. Then click the
Delete Row#
button to delete the row. Once
a row is deleted, it cannot be restored without inserting a row and
entering the data again.
Summary of Contents for ZyWAN
Page 1: ...ZyWAN User Manual ...