background image

Table of Contents

 

Chapter One  T Introduction

.................................. 1 

1.1  Product Features ....................................................................................1 

1.2  Unpacking..............................................................................................2 

1.3  Physical Environmental Requirements ..................................................2 

1.4  Panel and LED Indicators ......................................................................3

Chapter Two Hardware Installation 

Chapter Three 

Configuration For Access to the Internet

... 7 

3.1  Configuration on the main Interface ......................................................8 

3.2  

Use Built-in Dial-up Software to Connect to Internet

3.3  Use Fixed IP Address to Connect the Internet......................................11 

3.4  Use External Dial-up Software to Connect to the Internet...................13 

Chapter Four T Advanced configuration

..................... 19 

4.1  LAN Configuration..............................................................................20 

4.2  Admin Setting......................................................................................23 

FAQ

........................................................................ 26 

5.1 Q: How to judge if the ADSL2+ is connected normally? .......................26 

5.2 Q: What is Virtual dial-up? .....................................................................26 

5.3 Q: I am the user of ADSL2+, but sometimes I can’t have access to the 

Internet, why? ...............................................................................................26 

5.4 Q: I am far away from the telephone office, can I still use ADSL2+? ....27 

5.5Q: Does ADSL2+ fall off the internet like the common 56K Modem?....27 

5.6Q: Can ADSL2+ support sharing internet access in the LAN? ................27 

5.7Q: 

How to set and obtain dynamic IP for LAN users?

................28 

5.8Q: 

I am now using ADSL service, can I use ADSL2+ modem?

......................................................................................................................28 

 

Summary of Contents for TED8620R






























Reviews: