ZyWAN User Manual
Configuring the ZyWAN
© 2008 Arcom Issue D
34
Configuring the ZyWAN
Configuration of the ZyWAN is done using a Web browser, either Mozilla Firefox or
Internet Explorer. Other Web browsers have not been tested and may not be fully
compatible with the ZyWAN configuration Web page. This section gives detailed
explanations of each configuration parameter. Some typical examples are illustrated in
the section Configuration Examples, page 96.
Log into Web page
Make sure the ZyWAN is connected to the network.
To log into a web page:
1
Enter the appropriate address preceded by ‘http://’. If the ZyWAN has never been
configured, see
Initial configuration with a single PC
on page
24
or
Initial
configuration over a network
on page
28
. For instance, typically the default Web
address on Ethernet port 0 is http://192.168.1.1.
If the ZyWAN has been previously configured for a different network configuration,
its numeric address should be used instead. The Web configuration page may be
accessed via any available network (cellular, WiFi, Ethernet), unless Web access
for that network interface has been disabled.
2
The ZyWAN now uses HTTPS for secure transfer of configuration data. The
browser will display a warning about the certificate. Click on the message
“Continue to this website” (Internet Explorer), or select one of the “Accept this
certificate” options and click
OK
(Mozilla Firefox).
Summary of Contents for ZyWAN
Page 1: ...ZyWAN User Manual ...
