ZyWAN User Manual
Configuring the ZyWAN
© 2008 Arcom Issue D
85
The
Host Connection Table
looks like this:
The following fields and options are available for each row of the
Host Connection
Table
. Multiple rows may be added if necessary:
Field/Option
Explanation
Remote IP Port
Enter the port number (between 1 and 65535) to which the
Terminal Client connects. The same port number is used to
attempt connections to each of the three IP Addresses, if
configured. There is no option to connect to different port
numbers for each address in the Host Connection row.
Disconnect Mode
Select when to disconnect from the remote address. In any
case of a session disconnect, the
Connect Mode
(above)
determines how a reconnection occurs. Options available
are:
On +++
: Disconnect if the characters
+++
(and no more
than three + characters) are received on the serial port
within the
Demark Time
. This emulates the modem attention
string often used prior to hanging up a dial connection.
On Dropped DCD
: Disconnect when the Data Carrier Detect
(DCD) input on the serial port goes to a low (inactive) state.
Either: Disconnect either on receiving
+++
at the serial port
or on an inactive serial DCD line.
Neither
: Never disconnect from the remote server.
Connections may still be lost due to the remote side
dropping its connection or because of network interruptions.
Summary of Contents for ZyWAN
Page 1: ...ZyWAN User Manual ...