Arcom ZyWAN User Manual Download

Page: 47 / 114

ZyWAN User Manual

Configuring the ZyWAN

ZyWAN-3G options

On the ZyWAN-3G, the

Cellular

tab looks like this:

The following items are available:

Field/Option

Explanation

Choose Your Network
Provider

Choosing an option determines the network settings which
are used to connect to the cellular data network. Options are:

-Disabled-, Cingular, O2, Orange, T-Mobile,

and

Custom

Select Frequency
Band

Allows a specific 3G frequency band to be selected. This
option is only available for network providers Cingular and
T-Mobile.

Frequency Band

Select Frequency Band

is set to

Yes

, choose a cellular

frequency band to operate on. Options are:

All bands,

WCDMA 2100, GSM 900/1800, GSM ALL, WCDMA ALL

Custom

is chosen as the network provider for ZyWAN-3G, the following fields and

options become available:

Field/Option

Explanation

APN

Enter the APN (Access Point Name) of the cellular provider’s
data connection. This is supplied by the cellular provider.

Dial String

Enter the AT command dial string which is dialed for connection
to the cellular provider’s APN.

Auth Type

Enter the Authentication type used by the cellular provider.
Available types are:

None

Pap

, and

Chap

Frequency Band

If Select Frequency Band is set to Yes, choose a cellular
frequency band to operate on. Options are: All bands, WCDMA
2100, GSM 900/1800, GSM ALL, WCDMA ALL.

Summary of Contents for ZyWAN



















































































































Search results

Summary of Contents for ZyWAN

Reviews:

Related manuals for ZyWAN

Brands by name

Popular brands

Arcom ZyWAN, User Manual

Search results

Summary of Contents for ZyWAN

Reviews:

Related manuals for ZyWAN

Brands by name

Popular brands