Arcom ZyWAN User Manual Download Page 60

Page: 60 / 114

ZyWAN User Manual

Configuring the ZyWAN

WiFi configuration

The

Wifi

tab looks like this:

The following items must be configured in order to enable the 802.11 network
connection:

Option/Field

Explanation

Mode

Select the mode of operation of the 802.11 module. Options are:

ad-hoc

managed

, and

master

. A brief description of these modes

is given below:

Ad-hoc

: Network composed of only one group of wireless devices

and without an Access Point.

Managed

: ZyWAN connects to an 802.11 Access Point on a

network.

Master

: ZyWAN is the synchronization master or acts as an

Access Point.

Depending on the option selected, several of the main
configuration options change, as shown in the table below:

Mode

DHCP/Fixed IP

Run DHCP Server

Ad-hoc

Selectable

Only with fixed IP

Managed

Selectable

Not an option

Master

Fixed IP only

Selectable

SSID

Enter the network name (domain ID) which is to be used for this
wireless network. Enter

any

(case-sensitive) to allow roaming.

Channel

Select the frequency (channel) to use for the wireless network.

Use Encryption?

Select whether to use wireless encryption of data sent through
this wireless network. It is strongly recommended to use
encryption, unless the application does not support it.

Summary of Contents for ZyWAN



















































































































Search results

Summary of Contents for ZyWAN

Reviews:

Brands by name

Popular brands

Arcom ZyWAN, User Manual

Search results

Summary of Contents for ZyWAN

Reviews:

Brands by name

Popular brands