ZyWAN User Manual
Configuring the ZyWAN
© 2008 Arcom Issue D
87
Terminal Servers
The
Terminal Servers
tab looks like this:
The various items must be configured in order to set up Terminal Server services. The
Terminal Server sets up a listening port for inbound TCP/IP connection, allowing
communication directly to a local serial port.
After setting all the Terminal Server properties, click the
Submit New Configuration
button before switching to a new tab or closing the window.
Changes made to the
Terminal Server
page take effect immediately after
submitting changes, without requiring a reboot.
Enable Terminal Servers
To allow one or more Terminal Server services to be configured, set
Enable Terminal
Servers
to
Yes
. This makes the following items available in the
Table of Terminal Servers
:
The following buttons are available:
Button
Explanation
Insert Row#
Each of the Terminal Servers exists as a large set of properties
in a numbered table row. In order to insert a row in the table,
enter a number in the box between 1 and one greater than the
highest number of rows. Then click the
Insert Row#
button to
insert a blank row. This row must be filled in with all data
required.
Delete Row#
In order to delete a Terminal Server configuration (a row in the
table), enter a number in the box between 1 and the highest
number of rows. Then click the
Delete Row#
button to delete
the row. Once a row is deleted, it cannot be restored without
inserting a row and entering the data again.
Summary of Contents for ZyWAN
Page 1: ...ZyWAN User Manual ...
