ZyWAN User Manual
Getting started with your ZyWAN
© 2008 Arcom Issue D
25
Set up computer’s network
The PC must be set up to obtain its network address from the ZyWAN for this test. After
initial configuration of the ZyWAN, the PC can be changed back to its normal network
settings.
To configure the network as mentioned above:
1
Select the Windows
Start
menu,
Control Panel
,
Network
Connections
. Look at the
properties of the
Local
Area
Connection
:
2
Open the properties for the
Internet Protocol (TCP/IP)
. This should be set to
Obtain an IP address automatically
and
Obtain DNS Server address automatically
as follows:
If the PC address is already set in the range of 192.168.1.
x
, where
x
is
any number from 2 to 255, you may not need to change the
configuration. Just cancel out of the
Internet Protocol Properties
and skip
to the next section,
Browse ZyWAN configuration page
on page
27
.
Summary of Contents for ZyWAN
Page 1: ...ZyWAN User Manual ...
