Aquasafe WSL50 Pro, Instruction Manual

Page: 63 / 193

2.3.9 Storing Results
Press [STORE] key while the test result is displayed.
The display shows:
We advise you to enter a numeric code
(up to 6 digits). A code no. can contain references
to the operator or the sampling location.
e.g. [Shift] + [0] [0] [0] [1] [2] [3]
Confirm with [ ] key.
If a code number is not necessary, confirm by
pressing [ ] key direction. (The assignment for the
Code No. is 0 automatically).
The display shows:
The test results is then shown again.
The entire data set is stored with date, time, Code
No., method and test result.
Note:
The display also shows the number of free data
sets.
If there are fewer than 30 data sets are free, the
display shows:
Clear the memory as soon as possible (see Chapter
2.4.3 Delete Stored Results). If memory capacity
is
full, it is not possible to save additional test results.
Saved!
Code-No.:
_ _ _ _ _ _
Storage: 999
free records left
Storage: only
free records left