Aquasafe WSL50 Pro, Instruction Manual

Page: 26 / 193

3.3.6 User defined Program (Fig 1.4)
This mode will run an incubation cycle at the user defined temperature for 24
hours. Adjusting the user defined temperature is described in section 3.3.9. The
24 hour timer can be altered to any setting between 0 and 24 hours. Adjusting
the incubation time is described in section 3.3.8.
Pressing and holding the middle switch for 5 seconds will start the incubation
cycle and the screen will change to the following:
The asterisk preceding the temperature will switch on and off indicating the
status of the heater.
To stop or pause the incubation cycle press and hold the middle switch again for
5 seconds. The screen will display the following:
Pressing and holding the middle switch will restart the cycle or pressing the left
switch will return to the menu function screen.
20.9°C 20.9°C
U->##°C MEM OFF
*20.9°C 20.9°C
18:00 RUN! 24:00
*44.5°C 20.9°C
18:00 MEM 24:00