Aquasafe WSL50 Pro, Instruction Manual

Page: 155 / 193

3.6 Hold Function
The meter contains two data hold modes.
When the Auto-Hold function is enabled, the meter will automatically sense a
stable endpoint reading and hold. The ‘Hold’ indicator appears on the display.
If the Auto-Hold function is disabled, press the ON/OFF key, the meter will
immediately hold currently displayed value. Press the ON/OFF key again to
resume measuring.
3.7 Storing and Recalling Data from Memory
The HC1000 allows up to 500 data sets to be stored and recalled.
MEMORY INPUT:
During the measurement process, press the M+ key to store the measured
value to the memory, The ‘Memory’ indicator appears on the display.
MEMORY RECALL:
1. Press MR key in the measurement mode, the meter shows “LOC/P-01”
(Data Log).
2. Press ENTER key to confirm; the meter shows page number of the stored
data.
MR

Enter
..
…..….Page number