Aquamatic Aquacell S100, User Manual

Page: 141 / 170

MAINTENANCE
7.1
General
Maintenance Contract
In order to ensure optimum performance and reliablilty, it is essential
that your Aquacell Sampling equipment is maintained correctly.
Aquamatic or its distributor, can provide a 12 month Maintenance
contract, where regular visits to your site will be carried out, giving
you (and any associated regulatory body) the peace of mind that your
Sampler is always in good working order. Additionally during these
visits, your installation will be checked and the Sampler program will
be confirmed as being suitable for your requirements. Please contact
Aquamatic or your local distributor, for more details of this service.
User Maintenance
In addition to the above there is the need for routine user
maintenance. All models require, the sample tract to be kept clean
and the electronic / electrical hardware inside the sealed Sampler
Module to be kept dry.
In the case of the S300 samplers, the Intake and Exhaust Vents
to the rear of the Sampler Cabinet need to be kept unblocked,
particularly the S320 and S320H models where an unimpeded airflow
is essential to maintain efficient operation of the cooling system.
This is achieved by regularly brushing the flyscreens, to remove any
accumulated dust etc. Brushing the Flyscreens can usually be done
with the Air Cowls in place, however it may be preferable to remove
them, and this is done by removing the M4 pozi headed fixing screws.
If a Vent has become badly contaminated, it may be preferable to
replace it. The Air Cowl (where fitted) must be removed to access the
Vent panel. Before removing the Vent panel, you should switch off the
mains power to the Sampler at the main Isolator.
MAINTENANCE
7