Aquamatic Aquacell S100, User Manual, Page: 25 / 170

2.3
INTRODUCTION
Aquacell S100 Wastewater Sampler
This is a wall mounting automatic sampler, featuring the Aquacell
Sampler Module. The Aquacell S100 is intended for either indoor or
outdoor applications.
The Sampler is supplied with a Bracket /
Wall Mounting Plate / Mounting Bolts to
facilitate attachment to a wall or similar
vertical surface.
Lockable covers are provided to prevent
access to the sampler’s operational
components and Battery Compartment
When the Sampler is specified with a 10
litre Polyethylene Container, an optional
Suspension Bracket is available which
attaches to the lower edge of the Sampler
Module, and provides a suspension point for
the Container.
All other Removable Sample Collection Vessels can be used with the
S50 where the installation provides for the SCV to be located suitably
beneath the Sampler.
Whilst the Sampler is suitable for operation at ambient temperatures
between -10˚C and +50˚C, frost protection for the sample is not
provided.
Aquacell S200 Wastewater Sampler
This is a floor standing automatic Sampler, featuring the Aquacell
Sampler Module, and incorporating sample refrigeration. The
Sampler Module is mounted above the
metal Sample Container Housing. The
Aquacell S200 is intended for heated indoor
applications only.
The door to the temperature controlled
sample container housing is lockable.
The sampler can be used with all of the
Removable Sample Collection Vessels,
except the 2 x 4.5 litre Self-Emptying
Polypropylene Bottler.