Aquamatic Aquacell S100, User Manual

Page: 131 / 170

6.55
OPERA
TION
•
Pressing the STOP Button twice causes the Sampler to escape
both the VIEW status and the Warning Status. It also aborts the
Sample Program. The Display returns to the DEFAULT DISPLAY
Downloading the Samplers Event and Sample
Temperature logs to a Computer
(Only applies to Samplers supplied with the Data Connection)
The following assumes that the computer is programmed with, either
Microsoft
TM
Windows 95, Microsoft
TM
Windows 98, Microsoft
TM
Windows 2000, or Microsoft
TM
Windows XP, Microsoft
TM
Windows
Vista, or Microsoft
TM
Windows 7 and Microsoft
TM
Hyper Terminal.
This procedure illustrates how data is transferred from the Sampler to
the computer using Hyper Terminal and subsequently captured in a
text (.txt) file, for future reference.
Initial Preparations
Ensure the Sampler is not in the "Low Power Mode" (See page 6.21)
Connect the USB cable (supplied) between a USB port on the
computer and the Optional Data Connection, on the Front Panel of
the Sampler Module.
In order for your Aquacell Sampler to communicate with your PC it
is necessary to setup the appropriate interface drivers. This is a two
stage process and is carried out as follows:
Stage 1
•
The "New Hardware Found" balloon message will pop up in the
Tool Tray
•
The "Found New Hardware Wizard" window will open
•
Click the "Yes this time only" radio button
•
Click "Next"
•
The next "Found New Hardware Wizard" window will open
•
Click "Install software automatically" radio button
•
Click "Next"
•
The "USB Serial Converter’"will now be installed. NOTE this may
take a few minutes, do not unplug the sampler whilst this is being
carried out