Aquamatic Aquacell S100, User Manual, Page: 132 / 170

6.56
OPERA
TION
•
Click "Finish" when conformation of the installation is shown
Stage 2
•
The "New Hardware Found" balloon message will pop up in the
Tool Tray
•
The "Found New Hardware Wizard" window will open
•
Click the "Yes this time only" radio button
•
Click "Next"
•
The next "Found New Hardware Wizard" window will open
•
Click "Install software automatically" radio button
•
Click "Next"
•
The "USB Serial Port" driver will now be installed. NOTE this may
take a few minutes, do not unplug the sampler whilst this is being
carried out
•
Click "Finish’ when conformation of the installtion is shown
Your Aquacell Sampler is now ready to communicate with your PC
Configuring a Hyper Terminal Connection
•
Open Hyper Terminal (This is usually accessed from the “Start”
button via All Programs / Accessories / Communications / Hyper
Terminal).
•
The “New Connection – Hyper Terminal” window opens with
“Connection Description” window on top. This is inviting you to
configure the connection.
•
Enter a file name of your choice (e.g. Aquacell), and select an
icon, in the “Connection Description” screen to enable Windows to
identify the Aquacell connection configuration.
•
Press OK.
•
The “Aquacell (or your chosen name) - Hyper Terminal” window
opens with the “Connect To” window on top.
•
Check the “Connect using” drop-down menu and select the
appropriate COM port (The COM port number will relate to the
communications port, to which the Sampler is connected, and will
not normally be COM 1).
•
Press OK.