AP006 P22
C
INSTALLATION OF AUTOMATIC CONTROL UNIT (MODALITY - LAYOUTS)
The installation shown in figure C1 A-B considers the one in which the gate is driven by a rack and pinion system. Geared-motor is secured into the ground
with the appropriate sliding plate which permits an easy adjustment of the axial position.
The sliding plate itself can be welded to a foundation plate (C1 A), or (if the base is strong enough) secured into the ground with screw anchors (C1 B) and
chemical ones.
A description is also given of the typical layout that must be controlled when the site is inspected (see also fig. C11 for the layout and the positioning of the
rack).
The ONDA 500 / ONDA 800 pinion is compatible both with the plastic rack (with a steel core) and with the galvanized steel rack.
ATTENTION
It is essential that, when the site is inspected, the installer makes sure that there is sufficient room near the gate for the layouts illustrated in the
drawings.
C 1
A
B
