AP006 P9
B
LOWER GUIDES (B1)
The lower guide must be straight, level, and in good condition.
The wheels must be appropriate to the type of slides used.
WARNING
•
The structure of the gate must comply with the existing safety
regulations, specially in the points where there could be a squashing
or cutting danger.
•
A mechanical stop of the gate in opening (B1
➀
) must be welded to
the lower guide, to prevent the gate leaf from slipping off the guide
and, consequently, the DANGER OF FALLING OVER.
B 1
V-PROFILE GUIDE
ROUNDED-PROFILE GUIDE
UPPER GUIDES
There must be at least two upper guides fitted linear with the gate, which must prevent the gate from swaying during its travel, and they should not create a
hindrance to movement. Fig. B2 shows some examples of installation.
B 2
