is displayed at the same time, this means that the blue/green cable common for both sensors
is shorted to positive.
NOTES
No error is detected if the sensor does not work correctly or the control unit connector
or sensor terminals are rusty: then check through Axone if the temperature indicated is plausible
in relation to the ambient temperature. Check also that the sensor electrical characteristics are
observed: replace the sensor if not OK; if it is OK, check the sensor connector and the Walbro
control unit connector
Injector
Function
To supply the correct amount of petrol at the right timing.
Operation / operating principle
Injector coil is excited for the petrol passage to open.
Level in wiring diagram:
Coils and injectors
Location:
•
on the intake manifold
•
connector: on injector
Electrical characteristics:
12 Ohm +/- 5% (at 20 °C - 68 °F)
Pin-out:
•
PIN 1:Supply
•
PIN 2: ground connection
AXONE: PARAMETERS
Front cylinder injection time
Rear cylinder injection time
AXONE: ELECTRICAL ERRORS
Front cylinder injector 1201 -
malfunction
Error cause:
•
malfunction
Troubleshooting:
MXV 450
Electrical system
ELE SYS - 63
Summary of Contents for 854239
